Tent trailer and bike: family adventures in the great outdoors – tips, assembly & requirements

Tent trailer bike – Discover the ultimate freedom: camping with a tent trailer & bike!
From limitless flexibility to environmentally conscious adventures – find out why it’s worth taking your bike with you when camping with a tent trailer.
Together with your family, you will not only have fun, but also experience unforgettable moments in nature.
We’ll show you how to make sure you can mount your bike on the tent trailer and even extend it at a later date.
And if you don’t have a tent trailer yet, no problem!
Here you can find out how to configure one with an integrated bike rack and set off on a unique camping adventure!
If you want to know more about the foldable tent trailer, which is a great alternative or extension to the roof tent, you can also read more here: Tent trailer.

Camping with a tent trailer & bike: from flexibility to the environment

With a bike and a folding tent trailer, you are mobile and can easily explore different campsites and places.
Just like with the foldable tent trailer, which you can simply fold up and drive on.
This means you can travel to many great cycle routes by car and then explore them by bike.
You are always surrounded by nature, enjoy the fresh air and can experience the beauty of the surroundings up close.
You set your own pace and can decide spontaneously where and how long you want to stay.
You usually have the opportunity to get to know other cyclists and campers.
Perhaps you can join up with other keen cyclists at the campsite.
Camping with a bike and a folding tent trailer is usually cheaper than other types of vacation such as hotels or vacation apartments.
And if you take your own bike with you, you save on the cost of hiring bikes.
Another advantage is the physical one.
Cycling keeps you fit and active, while camping gives you a relaxing break.
And the environment loves it too!
Camping and cycling are some of the most environmentally friendly vacation activities.

That’s why it’s also worth taking your bike with you when camping with a tent trailer:

  • Flexibility
  • Close to nature
  • Cost efficiency
  • Independence
  • Health & Fitness
  • Community
  • Environmental friendliness

Together with the family: enjoy learning

Cycling ensures that you can spend time with the family in nature.
Children can get to know new friends from the campsite better on a bike tour together.
A bike ride together creates unforgettable family moments and memories that will keep you smiling long after the vacation is over.
Cycling can also be relaxing and help you leave the stresses of everyday life behind and enjoy your camping adventure to the full.
Not everyone can ride a bike yet?
No problem, here you will find tips on how you can teach all family members before your vacation:

What could be better than a bike tour with the whole family? A family drives through a forest in sunny weather

Mounting on the tent trailer: How to take your bike with you!

The tent trailer is a practical solution for transporting your tent and camping equipment and you have a fold-out sleeping area with you.
To take your bike with you, you will need a bike rack to attach the bike securely and stably to the trailer.
You attach this to the drawbar of the tent trailer.
Of course, you can also use a roof rack for the bikes, as only the trailer coupling is occupied by the tent trailer.
However, you must then pay particular attention to the route and possible obstacles where the roof rack could get stuck because it protrudes beyond the car.
You should also make sure that a roof rack is approved for your car.
The bike rack on the drawbar of the tent trailer is very practical.
Whether the tent trailer is approved for your car depends on the drawbar load.
This describes the maximum weight that can be carried on the trailer coupling.
You can learn more about this here:

Extend your tent trailer: even retrospectively

You already have a tent trailer and a bike rack?
No problem, just make a small change and you’re ready to go!
An adapter for the drawbar can be fitted at Campwerk, allowing you to continue using your existing bike carrier.
You can take a look at it here:

No tent trailer yet?
Buy directly with bike rack!

However, you should not transport a bike rack designed for more than three bikes on your tent trailer.
The drawbar could be too short for this.
So if you want to take more than three bikes with you, it’s best to have a bike rack fitted to your tent trailer right from the start.
This is also a good option if you don’t yet have your own bike rack, as it means you have both a tent trailer and bike rack in one.
So, what are you waiting for?
Why not configure your perfect tent trailer right away, with lots of detailed extras to suit your needs.
You can find this option here, with lots more tips on tent trailers and a video guide: You can also take another look at the two options here in the extensions for the tent trailer:

Latest articles

Go wherever you want.
Stay where it’s most beautiful.

Stay up to date and subscribe to our Newsletter here.

Products

Locations

Help

Scroll to Top
Offroad
Raised and extra stable for road and off-road… What do you do if you are traveling in regions with poor roads or drive an off-road vehicle or SUV whose dome height does not fit conventional trailers? The solution: the off-road tent trailer from CAMPWERK – specially developed for extreme conditions. This unique model impresses with a raised and particularly robust AL-KO chassis that can withstand even the most demanding off-road routes. The entire body is made of lightweight but sturdy aluminum, reinforced with durable stainless steel components. So you are perfectly equipped for any terrain.
Black / Silver
Available now: The CAMPWERK Offroader in the exclusive Black/Silver Edition CAMPWERK is expanding its range and now also offers the popular off-road tent trailer in the coveted Black/Silver Edition. The high-quality aluminium body is completely anodized in matt black, while the mudguards are powder-coated in elegant “Gun Silver Metal”. An absolute eye-catcher on any road and in any terrain!
The off-road trailer from CAMPWERK impresses with its lightweight construction: Thanks to the aluminum body, the base only weighs around 300 kg when empty. With a permissible total weight of 1.5 tons, it offers an impressive payload capacity of up to 1.2 tons – ideal for small excursions, transport and even larger expeditions.

Visually, the trailer blends in perfectly with the appearance of an off-road vehicle or SUV with its coarse-tread MT tires and robust, full-length aluminium mudguards. The mudguards are also designed in such a way that they are ideal for the safe transportation of petrol and water canisters or gas bottles.

To ensure flexibility, the off-roader’s tyres can be individually adapted to the towing vehicle on request, so that only one set of spare wheels is required. The standard ball head coupling can also be optionally replaced with a DIN or NATO eye.
T-drawbar or V-fork ?
Thousands of trailer drivers know the problem of tight spaces only too well: if you drive into a narrow lane and have to turn, it is important to back your car as far as possible against the trailer in order to get around the bend without any problems. With a T-drawbar, you can utilize the maximum steering angle. This is precisely why we at CAMPWERK rely on this tried-and-tested technology – for optimum flexibility and maneuverability, no matter how tight things get.
T-drawbar
V-fork
T-drawbar
V-fork
Chassis
  • Extra strong square T-drawbar 100x100mm for maximum stability and best maneuverability
  • Axle up to 1,500 kg with maintenance-free hexagonal rubber spring axle
  • Optionally with watertight wheel hub
  • 2 crossbars
  • The chassis is exclusively from the renowned manufacturer AL-KO, market leader in the car trailer and caravan sector
  • Safety indicator on the clutch
  • Independent suspension
Aluminum body
  • Our aluminium trailers are equipped with anodized aluminium profiles
  • double-walled anodized aluminium side panels 30mm, 440mm high
  • Large emergency lighting with integrated rear fog light
  • Equipped with balanced tires as standard
  • Base plate stable screen-printed base, non-slip
  • Complete M8 stainless steel screw connection (V2A stainless steel)
  • Electrical system: Supply cable (wiring harness) standard with 13-pin plug
  • Tailgate latches very elaborate, made entirely of stainless steel
Wheels
  • Black powder-coated steel rim
  • 235/85 R16 tires optionally adaptable to towing vehicle
  • Mud Terrain tire tread
  • Special wheel connection for your towing vehicle on request
Terrain values
  • 350 mm ground clearance
  • 570 mm wading depth
  • 27° slope angle
Equipped for every situation thanks to the versatile accessories...

Raised dropside

20L canister

Towbar adapter for bike carrier with coupling connection

2-4 bike racks

Anti-drag clutch

Onroad

The perfect solution for your camping adventure:
Road trailer with tent
Imagine a first-class equipped road trailer that is ideal for camping trips in Germany and the surrounding countries.
This trailer comes with a sturdy holding device for a matching tent that can be set up in no time at all.
The result is your mobile home – ready for unforgettable tours!

Your decisive advantage: you are ideally equipped for your vacation in a particularly cost-effective way. And when you’re not on the road, you can use the trailer as a conventional utility trailer. We offer you the road trailer in two versions, depending on your needs: An unbraked version with a permissible total weight of 750 kg and the braked version recommended by us with a permissible total weight of 1,300 kg.
10-year guarantee
Our trailer base was not created in the laboratory – it was made for the real world. The robust construction is optimized for tough conditions. Oversized axles and virtually indestructible aluminum frames ensure exceptional durability. We are the only supplier in Germany to give you a 10-year guarantee on this unique quality!
T-drawbar or V-fork ?
Thousands of trailer drivers know the problem of tight spaces only too well: if you drive into a narrow lane and have to turn, it is important to back your car as far as possible against the trailer in order to get around the bend without any problems. With a T-drawbar, you can utilize the maximum steering angle. This is precisely why we at CAMPWERK rely on this tried-and-tested technology – for optimum flexibility and maneuverability, no matter how tight things get.
T-drawbar
V-fork
T-drawbar
V-fork
Chassis
  • 2 crossbars
  • Maintenance-free rubber spring axles
  • Independent suspension
  • The chassis is exclusively from the renowned manufacturer AL-KO, market leader in the car trailer and caravan sector
  • Safety indicator on the clutch
Aluminum structure
  • Our aluminium trailers are equipped with anodized aluminium profiles
  • double-walled anodized aluminium side panels 30mm, 440mm high
  • Large emergency lighting with integrated rear fog light
  • Equipped with balanced tires as standard
  • Base plate stable screen-printed base, non-slip
  • Complete M8 stainless steel screw connection (V2A stainless steel)
  • Electrical system: Supply cable (wiring harness) standard with 13-pin plug
  • Tailgate latches very elaborate, made entirely of stainless steel
Equipped for every situation thanks to the versatile accessories...

Raised dropside

20L canister

Towbar adapter for bike carrier with coupling connection

2-4 bike racks

Anti-drag clutch

Material and processing.
The tent fabric of our trailer tents is made from a high-quality, 450 g blended fabric, also known as canvas. This unique combination of cotton and polyester combines the advantages of a natural fiber with those of a modern high-tech material. The result is a robust, breathable fabric that impresses with its pleasant feel and high dimensional stability.

The tent fabric, which is also used by the military, is impregnated and particularly tear-resistant thanks to the ripstop process. In this special weaving technique, thicker threads are woven into the fabric at intervals of around 10-15 millimetres, giving the fabric its characteristic tiled structure and exceptional tear resistance. It goes without saying that our fabrics are opaque and therefore offer optimum protection and privacy.
The basis of our trailer tents is a robust stainless steel frame with a thickness of 3×3 cm. A 1.8 cm thick, water-resistant wooden floor panel is securely fastened to this sturdy frame with stainless steel screws. The frame of the trailer tents is also made of galvanized steel tubing and special stainless steel components that ensure maximum stability. The modern surface finish not only offers a high level of corrosion protection, but also gives the material a pleasant feel and ensures a durable, weatherproof construction.
We rely exclusively on yarn from the German market leader Amann. Thanks to the combination of a cotton core and a high-tenacity polyester core, this yarn is characterized by a particularly high tensile strength and excellent water resistance.

On contact with water, the cotton coating swells and closes the seam holes created during sewing. For additional protection, all seams in the roof area are fitted with a transparent sealing strip to ensure maximum waterproofness.
Less is sometimes more.
We are often asked: What about the water column? For tent fabrics, the impermeability of the fabric is specified in the form of the water column. For cotton tents, this value is usually around 300 to 400 mm. However, our tent fabric offers an exceptionally high water column for cotton fabric of around 750 mm. This means that theoretically more than 75 cm of water can stand on the material before the first drops penetrate.

A major advantage of cotton as a natural raw material is its ability to swell when it gets damp, which provides additional waterproofing. In contrast, synthetic fabrics, which cannot swell, must have a much higher water column (between 3,000 and 10,000 mm, depending on the material) in order to achieve comparable waterproofness.
Good night.
The comfort sleep set consists of a high-quality visco foam mattress that adapts perfectly to the individual body shape, ensuring a restful night’s sleep. The set is complemented by the innovative Froli bed spring system, which guarantees an exceptional sleeping experience. Perfect sleeping comfort in a well thought-out overall package.
Premium mattress.
An excellent mattress is the basis for healthy and restful sleep. Just as every person is unique, their mattress should also be individually tailored to them.
Our premium mattress adapts perfectly to the contours of the body and promotes orthopaedically correct positioning of the spine. Thanks to targeted pressure relief, back muscles and intervertebral discs can relax optimally. The innovative construction and high-quality materials create an ideal sleeping environment.
There are no compromises at CAMPWERK: We rely on flexible visco foam with memory function. The unique combination of supportive foam core and relieving visco foam topper ensures maximum sleeping comfort.
  • Visco-elastic mattress.
  • High-quality Tencel® cover (38 % Tencel®, 62 % polyester).
  • Four practical turning loops.
  • Four-sided zipper.
  • Removable, divisible and washable.
  • Four practical turning loops.
Suspension.
Good ventilation is crucial for your well-being and sleep hygiene. To ensure maximum sleeping comfort, we combine our mattress with an innovative Froli slat base. The flexible spring elements form a comfortable slat base with individually adjustable firmness zones. This combination ensures orthopaedically correct positioning of the body and provides targeted, pressure-relieving support. This effectively prevents tension and one-sided strain. The open, air-permeable cells also enable optimum ventilation and create a healthy sleeping environment.
Are you allergic or do you have special health requirements? No problem! We cooperate with a renowned German mattress manufacturer to offer customized solutions. Simply contact us and together we will find the ideal mattress for your needs.